Simplinity Solutions Private Limited

Effective alternative to traditional pressure pots and standard diaphragm pumps

• Double diaphragm pump designed specifically for finishing applications
• Low pulsation output provides smooth pump changeover
• Low shear design for minimal degradation of shear sensitive materials
• Rugged aluminum and stainless steel construction handles a wide variety of fluids

Amongst the most popular general purposeair operated pumpsPumps are single acting with dischargeupto 14 LPMIdeal for use with medium to high viscosityoils (upto SAE 130) for transferring over shortdistances (upto 30 meters), mostly used withTrolley mounted kitsAir Consumption: 230 LPM

World-class industrial oil dispensing pumps withguaranteed performance & hassle free operationPumps are designed to work in tough conditions & areideal for use in Industry, workshop, farm , constructionsites or as part of the mobile oil systemAll metal construction, fully CNC machined withhardened wear resistant moving partsReciprocating piston operated 63mm dia. air motorBuilt in strainer at inlet to keep contaminants away

World-class industrial oil dispensing pumps withguaranteed performance & hassle free operationPumps are designed to work in tough conditions & areideal for use in Industry, workshop, farm , constructionsites or as part of the mobile oil systemAll metal construction, fully CNC machined withhardened wear resistant moving partsReciprocating piston operated 63mm dia. air motorBuilt in strainer at inlet to keep contaminants away

Pump dispenses grease at pressures upto 50 times the air inlet pressure Designed to work in tough conditions; these are ideal for use in industry, workshop, farm, construction or as part of the Mobile Grease System All metal construction, fully CNC machined with hardened wear resistant moving parts Reciprocating piston operated 63 mm dia. air motor Strainer at suction tube inlet removes dirt, debris etc from entering into the system.

The New Air Operated Fluid Transfer PumpIdeal for quick & safe transfer of fluids inindustrial and workshop applicationsPump complete with:• Air Pressure Regulator: Factory set at 5 PSI(0.3 BAR) for controlled air supply into thedrum• 1/4" spring loaded safety valve to preventpressure build-up in the pump system• 2 Pc Suction Tube: Suitable for use on 50-205litre drums with 1-1/2" or 2" opening• 6' (1.85m) × Ø 1" (25mm) discharge hose & steelspou

A "Fire-Ball 425, 75:1" refers to a high-pressure grease pump manufactured by Graco, specifically designed for heavy-duty, high-volume grease dispensing applications, with a 75:1 pressure ratio, meaning for every 75 units of air pressure applied, it generates one unit of fluid pressure; the "425" signifies the model number within the Fire-Ball series, known for its large air motor capacity suitable for long pipe runs and multiple simultaneous dispensing needs. Key points about the Fire-Ball 425, 75:1:

• High-volume grease dispensing: Ideal for situations requiring large amounts of grease to be dispensed quickly, like in truck service shops or industrial settings. 
• High pressure capability: The 75:1 ratio allows for powerful grease delivery over long distances. 
• Durable construction: Features a robust cast aluminum air motor housing for longevity and resistance to wear and tear. 
• Application versatility: Can handle various types of grease, including NGLI #2 consistency. 

The Fire-Ball 425 3:1 is a universal size oil pump from Graco Inc. It's an air-operated pump with a 4.25 inch air motor that can handle long pipe runs and high volume dispensing. It's designed for applications that require multiple dispenses at the same time. Features: 

• DurableMade with a thick cast aluminum air motor housing
• Low maintenanceFewer moving parts in the air motor assembly means less downtime and lower repair costs
• Positive sealingNon-metallic poppet valves provide positive sealing performance, even in dirty air environments
• Corrosion-resistantDesigned with corrosion-resistant materials like stainless steel, aluminum, nickel plating, and liquid salt nitriding

Applications: 

• Truck fleet service facilities
• In-plant applications
• Dispensing motor oil, gear oil, automatic transmission fluid, and hydraulic fluid

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime
• Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover
• One-Piece Center Section - Eliminates air leaks for more efficient operation
• Four Bolt Joint Design - Bolted design provides even sealing pressure for leak-free operation
• Multiple Ports - Increased number of ports for installation flexibility
• Optional Features - DataTrak™ (Runaway protection and tracks material usage), Pulse Output (Cycle count capability)
• Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
• 30% more efficient than the market leader
• 20% increase in fluid flow compared to the Husky 1040

World-class industrial oil dispensing pumps with guaranteed performance & hassle free operationPumps are designed to work in tough conditions & are ideal for use in Industry, workshop, farm, construction sites or as part of the mobile oil systemAll metal construction, fully CNC machined with hardened wear resistant moving partsReciprocating piston operated 63mm dia. air motorBuilt in strainer at inlet to keep contaminants awayWETTED COMPONENTSSteel, Brass, Aluminum,Hi-Nitrile Rubber, Polyurethane, Turcite* & Nylon** (*Only On 3:1 & 5:1 Pumps,**Only On 1:1 Pump)High pressure air operated pumps for dispensing oil at 5 times the pressure as the air inletPumps are double acting with discharge upto 18LPMIdeal for use with high viscosity oils (upto SAE 240) for transferring over short & long distances (upto 50 meters), mostly used with Trolley mounted kits both with & without hose reels, as well as with fixed systems for centralized distributionAir Consumption: 250LPM

World-class industrial oil dispensing pumps with guaranteed performance & hassle free operationPumps are designed to work in tough conditions & are ideal for use in Industry, workshop, farm, construction sites or as part of the mobile oil systemAll metal construction, fully CNC machined with hardened wear resistant moving partsReciprocating piston operated 63mm dia. dir motorBuilt in strainer at inlet to keep contaminants awayWETTED COMPONENTSSteel, Brass, Aluminum,Hi-Nitrile Rubber, Polyurethane, Turcite* & Nylon** (*Only On 3:1 & 5:1 Pumps,**Only On 1:1 Pump)1:1 air operated oil pump designed with a double acting mechanism for quick transfer of oil from large drums to smaller containers with discharge upto 40LPMIdeal for use with low to medium viscosity (upto SAE 80 Oils) for transferring over short distances (5 metres)Air Consumption: 270LPM1:1 pump is also available complete with oil bar tap & connecting links (ODS series), used as an air operated oil dispenser to quickly & conveniently dispense oils from drums

World-class industrial oil dispensing pumps with guaranteed performance & hassle free operationPumps are designed to work in tough conditions & are ideal for use in Industry, workshop, farm, construction sites or as part of the mobile oil systemAll metal construction, fully CNC machined with hardened wear resistant moving partsReciprocating piston operated 63mm dia. dir motorBuilt in strainer at inlet to keep contaminants awayWETTED COMPONENTSSteel, Brass, Aluminum,Hi-Nitrile Rubber, Polyurethane, Turcite* & Nylon** (*Only On 3:1 & 5:1 Pumps,**Only On 1:1 Pump)1:1 air operated oil pump designed with a double acting mechanism for quick transfer of oil from large drums to smaller containers with discharge upto 40LPMIdeal for use with low to medium viscosity (upto SAE 80 Oils) for transferring over short distances (5 metres)Air Consumption: 270LPM1:1 pump is also available complete with oil bar tap & connecting links (ODS series), used as an air operated oil dispenser to quickly & conveniently dispense oils from drums

Ideal for use with water based fluids, detergents etc. in garages workshops, car washers, lube trucks, industrial applications etc.Wetted components are made out of stainless steel for protection against corrosionReciprocating piston operated 63 mmdia. air motorPump has a built in stainless steel strainer at inlet to keep contaminants away2" die cast aluminium bung for use with 210 litre drumsWETTED COMPONENTSStainless Steel, Brass, Aluminium,Hi-Nitrile Rubber, Polyurethane, TurciteRECOMMENDED USEWater, water soluble lubricants, coolants, soap solutions, detergents, windshield fluids etc.DO NOT USEFood Grade media, waste oil or anymedia not compatible with the pumpcomponents

World-class industrial oil dispensing pumps with guaranteed performance & hassle free operationPumps are designed to work in tough conditions & are ideal for use in Industry, workshop, farm, construction sites or as part of the mobile oil systemAll metal construction, fully CNC machined with hardened wear resistant moving partsReciprocating piston operated 63mm dia. dir motorBuilt in strainer at inlet to keep contaminants awayWETTED COMPONENTSSteel, Brass, Aluminum,Hi-Nitrile Rubber, Polyurethane, Turcite* & Nylon** (*Only On 3:1 & 5:1 Pumps,**Only On 1:1 Pump)1:1 air operated oil pump designed with a double acting mechanism for quick transfer of oil from large drums to smaller containers with discharge upto 40LPMIdeal for use with low to medium viscosity (upto SAE 80 Oils) for transferring over short distances (5 metres)Air Consumption: 270LPM1:1 pump is also available complete with oil bar tap & connecting links (ODS series), used as an air operated oil dispenser to quickly & conveniently dispense oils from drums

The New Air Operated Fluid Transfer PumpIdeal for quick & safe transfer of fluids inindustrial and workshop applicationsPump complete with:• Air Pressure Regulator: Factory set at 5 PSI(0.3 BAR) for controlled air supply into thedrum• 1/4" spring loaded safety valve to preventpressure build-up in the pump system• 2 Pc Suction Tube: Suitable for use on 50-205litre drums with 1-1/2" or 2" opening• 6' (1.85m) × Ø 1" (25mm) discharge hose & steelspout