Simplinity Solutions Private Limited

RTV-1 Moisture Curing Silicone RubberELASTOSIL N3026 is non-slump, non-corrosive, Oxime-cure one-component silicone, which cures at room temperature under the influence of atmospheric moisture.

WACKER® TC 3033 is gray, soft consistency, heat sink pastes with marked thermal conductivity. Electricallyinsulating.
PropertiesSpecific features One component, non-curing system Low oil bleed (<0.15%) Good thermal conductivity (~ 3 W/mK) Odorless, solvent free formulation Thermally stable and reliable across a wide temperature range Greater hydro stability and stronger resistance to chemicals

Linear Silicone Fluids WACKER® AK 0,65 is a hexamethyldisiloxane. Due to its chemical structure, WACKER® AK 0,65 has an outstanding property profile, which sets it apart from organic materials such as mineral oils.


Properties:

WACKER® AK 0,65 is a clear, colorless liquid with slight inherent odor.
• minimal change in physical properties over a broad temperature range
• excellent water-repellent properties
• good dielectric properties
• low surface tension and thus high surface activity
• chemically highly unreactive
• low solidifying point
• high heat resistance
• good solubility in a wide range of solvents

WACKER® TC 3070 is white, soft consistency, heat sink paste with marked thermal conductivity. Electrically insulating.

Properties Specific features
• One component, non-curing system
• Low oil bleed (<0.01%)
• Good thermal conductivity (1 W/mK)
• Odorless, solvent free formulation
• Thermally stable and reliable across a wide temperature range
• Greater hydro stability and stronger resistance to chemicals.

Application details:-
• Encapsulation • Antifriction Agents & Lubricants

RTV-2 Thermally Conductive Encapsulant.

ELASTOSIL® TC 3807 EV A/B IN is a pourable, 1:1 two-component thermally conductive silicone rubber encapsulant that vulcanizes at room temperature and accelerates on heat.

Properties
• Two-part system, 1:1 mixing ratio
• Easy to mix and use
• Room temperature curing but accelerates on heat
• Excellent durability.

Special features
• Low viscosity
• Good flowability for fast processing and short cycle times
• Easy deairing to avoid pin holes
• High Shore A hardness (approx. 65)
• Good thermal conductivity (1.0 W/mK)
• Flame retardant, UL 94 V-0 certified
• RoHS certified
• No post curing required
• Excellent reliability over a wide range of temperature
• Aids heat dissipation

ELASTOSIL® TC 3800 A/B is a pourable, 1:1 two-component silicone rubber encapsulant that vulcanizes at room temperature to a soft silicone elastomer.


Properties
• Two-part system, 1:1 mixing ratio
• Low viscosity, easy to mix and use
• Room temperature curing but accelerates on heat
• Low density
• Excellent durability Special features
• Soft, Shore 00 hardness
• Good thermal conductivity (approx. 0.3 W/mK)
• No post curing required
• Excellent reliability over a wide range of temperature
• Mild heat dissipation
• Adhesion to substrates like aluminum, MS 

Application details
• Low density potting
• Encapsulation of electronic components for the automotive and power electronics
• Production of damping elements 

ELASTOSIL® TC 800 A/B is a pourable, 1:1 two-component very soft silicone rubber encapsulant that vulcanizes at room temperature and accelerates on heat.

ELASTOSIL® N9111 BLACK is a non-slump, alkoxy-cure one-component silicone, which cures at room temperature under the influence of atmospheric moisture.

Special features:
• Broad adhesion profile
• Flame retardant
• High elongation
• High tear-resistant
• Non-corrosive to metals
• Non-slump
• Thixotropic
• Tin-free catalysis

ELASTOSIL® TC 850 F A/B is a rapid curing, pourable, 1:1 two-component silicone rubber encapsulant that vulcanizes at room temperature and accelerates on heatPropertiesTwo-part system, 1:1 mixing ratio.Rapid curingEasy to mix and pour.Room temperature curing but accelerates on application of heat.Excellent durability

RTV-2 THERMALLY CONDUCTIVE ENCAPSULANT.

ELASTOSIL® TC 3806 A B IN is a pourable, 1:1 two part thermally conductive silicone rubber encapsulant which is room temperature & heat curable.

Special Features
• Two part hardening by ratio 1:1
• Very good flow ability
• Medium Shore A hardness (approx.. 65)
• Excellent thermal conductive property (approx. 0.67 W/mK) • Flame-retardant by UL 94 V0
• Cures without exothermic reaction
• No post curing required.